Lynxby DOMINION
ISO 14001 · GHG · Environmental management and emissions

Every environmental aspect,measured, not assumed.

Lynx measures the electricity, gas and water of each line continuously and alerts you when a consumption goes out of range. ISO 14001 monitoring stops depending on manual readings.

14001:2015 · Environmental management

Photo: Maksym Diachenko / Unsplash

Energy management · Monthly energy report Water, gas and electricity, against their average.

Lynx report: the month’s change in electricity, gas and water against the average of the previous twelve months123
  1. 1
    § 6.1.2Environmental aspectsWater, alongside electricity and gas: each aspect with its consumption measured.
  2. 2
    § 9.1.1Monitoring and measurementEvery month, against the average of the previous twelve. No manual calculations.
  3. 3
    § 6.2ObjectivesThe trend of each resource, to set objectives and track them.

Lynx report, with no data that identifies the plant.

Environmental monitoring From manual readings to continuous data.

TodayWith Lynx
ReadingsSomeone writes down the meters once a month.Every meter, read automatically and continuously.
DeviationsThey show up on the invoice, weeks later.The alarm goes off the same day, on the platform or by email.
AspectsAssessed with the whole plant’s annual consumption.Per line and per piece of equipment, with the full history.
AuditThe year is rebuilt in a spreadsheet.The period report, ready for the auditor.

ISO 14001:2015 · § 6.1.2 environmental aspects, § 8.1 operational control and § 9.1.1 monitoring and measurement. With the GHG Protocol, the same activity data serves for Scopes 1 and 2.

Identify, watch, alert, review Environmental monitoring, on the same platform.

  1. 01IdentifyEach line, in its chart: where each significant aspect sits.ISO 14001 § 6.1.2
  2. 02WatchWater, hour by hour, with its peak and its daily maximum.ISO 14001 § 9.1.1
  3. 03AlertIf a consumption goes out of range, the alarm goes off the same day.ISO 14001 § 8.1
  4. 04ReviewEach objective with its target and its status, ready for the management review.ISO 14001 § 6.2 · 9.3

Watch, Alert and Review are Lynx screenshots and reports with no data that identifies the plant; Identify, a screen with sample data.

Built for the plant The environment is measured on the line too.

  • Water, gas and electricityOn the same platform and in the same report.
  • Threshold and condition alarmsOn the platform or by email.
  • From the metering equipment, not the invoicePower analysers, flow meters, gas meters and probes.
  • If metering is missing, we install itDOMINION installs it. Turnkey.

The evidence Already running in the plant.

> 1,000
monitored assets: electricity, steam, water and gas
17
plants in a steel group, on a single platform
2016
the year that group’s measured history starts
Lynx by Dominion

Put a figure on your ISO 14001.

Tick EMS, your plants and your points. The configurator gives you the first year and the renewal.

Or write to us directly at sales@lynxplatform.net

What is still yours. The environmental management system, the emission factors, the internal audit and certification with your body.

← Back to compliance