Lynxby DOMINION
CSRD · ESRS E1 · Sustainability reporting

The energy of the whole group,ready to audit.

Lynx measures each plant’s consumption by source, its own renewable output and the activity data the emissions come from. The same data and the same period in every plant, traceable to the meter.

CSRDESRS E1 · Energy and emissions

Energy management · Monthly energy report Every energy, in the same report.

Lynx monthly energy report: the month’s electricity, gas and water, with their hourly curve123
  1. 1
    E1-5Consumption by sourceThe month’s electricity, in MWh, measured at the plant’s meters.
  2. 2
    E1-6Scope 1 dataGas, in m³, from which direct emissions are calculated.
  3. 3
    VerificationHour by hourEvery total comes from the hourly curve, with its peak and its daily maximum.

Lynx report, with no data that identifies the plant.

What Lynx covers What ESRS E1 asks for, point by point.

E1-5 · Energy
  • Total energy consumptionPer plant and per source, in MWh, from the meter and not the invoice.
    Lynx measures it
  • Own renewable energyPhotovoltaic output and self-consumption, read at the inverter.
    Lynx measures it
  • Energy intensityLynx provides the consumption; finance, the net revenue.
    Lynx provides the data
E1-6 · Emissions
  • Scope 1The m³ of gas and the fuel of each plant. The emission factor is yours.
    Lynx provides the data
  • Scope 2The kWh bought from the grid, with self-consumption already deducted.
    Lynx provides the data
  • Scope 3The value chain falls outside plant data.
    You provide it

Directive (EU) 2022/2464 (CSRD) and ESRS E1. The EU has revised the scope and timeline of the CSRD, which also depend on each Member State’s transposition.

Measure, separate, consolidate, deliver All the report data, on the same platform.

  1. 01MeasureHour by hour and day by day: each plant’s consumption, complete and with no gaps.ESRS E1-5 · Energy consumption
  2. 02RenewablesEach month’s output, self-consumption and export: the renewable share of the mix, measured.ESRS E1-5 · Energy mix
  3. 03ConsolidateEach plant’s year, month by month, with the same unit and the same period.ESRS E1-5 · Per plant and per month
  4. 04DeliverEach plant’s report, every month and in the same format across the group.ESRS E1-6 · Activity data

Measure, Renewables and Deliver are Lynx screenshots and reports with no data that identifies the plant; Consolidate, a screen with sample data.

Why Lynx Group data, not a sum of spreadsheets.

  • Every plant, a single datasetSame unit and same period, in any country.
  • Renewables, measuredFrom the inverter, not an estimate.
  • Into the group’s systemOver REST and MQTT, with no manual exports.
  • In the cloud or at your plantCloud Edition or on-premise.

The evidence Already running in the plant.

17
plants in a steel group, on a single platform
2016
the year that group’s measured history starts
> 50
inverters from several manufacturers, on a single platform
Lynx by Dominion

Put a figure on your report.

Tick EMS and Photovoltaic, your plants and your points. The configurator gives you the first year and the renewal.

Or write to us directly at sales@lynxplatform.net

What is still yours. The emissions calculation with its factors, the double materiality assessment, drafting the report and its external assurance.

← Back to compliance